Abstract:To address the susceptibility of red clay from Mile, Yunnan Province, to mechanical degradation under wet-dry cycling, an experimental study was conducted using locust bean gum (LBG) and rice straw fiber (RSF). Under the condition of LBG content (mass fraction, the same below) of 4% and RSF content (mass fraction, the same below) of 0%, 0.2%, 0.4%, and 0.6%, 0, 2, 4, and 6 wet-dry cycles were conducted to analyze the static mechanical properties of the stabilized red clay through unconfined compression and direct shear tests. The results show that LBG substantially increases the unconfined compressive strength and cohesion of red clay, while an appropriate RSF content further enhances the stabilization effect. The best overall mechanical performance is achieved at an RSF content of 0.4%. Compressive strength, elastic modulus, and cohesion generally decreases with increasing numbers of wet-dry cycles, with strength degradation occurring predominantly between the second and fourth cycles. Compared with untreated red clay, LBG-RSF stabilization effectively mitigates compressive strength loss induced by wet-dry cycle. Direct shear tests indicate that the combined treatment has a minor effect on the internal friction angle, with mechanical improvements primarily attributable to increased cohesion. Scanning electron microscopy (SEM) observations reveal that LBG forms a gel network on soil particle surfaces and between particles, filling pores and cementing particles together. RSF interlocks with the gel and soil particles to form a composite skeleton, providing bridging reinforcement and improving soil integrity and stability at the microscale. LBG-RSF stabilization can substantially enhance the structural stability and mechanical durability of red clay under wet-dry cycling environment. This approach provides a low-carbon, sustainable option for ground improvement and design for long-term service performance in red clay regions.